If you’ve spent any time in industrial welding or metal fabrication, you’ve probably heard of GTAW (Gas Tungsten Arc Welding)—more commonly just TIG welding, right? And if you’re looking for a process that’s a step up for high-volume, high-precision work, Plasma Transferred Arc (PTA) is probably on your radar. As someone who’s been supplying PTA equipment and consumables for over a decade now, I get it—mixing these two processes up is super easy, especially since they share core components like a tungsten electrode and an inert gas shield. But they’re not interchangeable, and picking the wrong one can kill your weld quality, slow your production, or even drive up costs. Let me break this down like I would with a shop foreman or a new welder in the training room, no stuffy jargon unless it’s necessary. Plasma Transferred Arc

First, let’s start with the basics so we’re all on the same page. Both GTAW and PTA use a non-consumable tungsten electrode to create an arc, and both rely on argon (sometimes helium) to shield the weld pool from oxygen, nitrogen, and other crud that causes porosity or brittleness. That’s where the similarities end, though. The big difference boils down to how the arc is formed and how much control you have over heat, filler metal, and overall penetration.
Let’s talk GTAW first, since it’s the more old-school, hand-friendly option. GTAW works by creating a single arc between the tungsten electrode and the workpiece. The gas shield flows around that arc, protecting the hot tip of the tungsten and the weld pool. It’s super versatile—you can weld thin aluminum, stainless steel, titanium, even exotic alloys like Inconel. The problem? GTAW is mostly a hand process. Yeah, you can mechanize it, but even then, it’s slow. You’re limited to about 100-150 amps for most handheld setups, max 200 if you’re running fancy gear. That means for thick materials, you have to do multiple passes, grind between each, and the heat input is spread out, which can lead to warping on thin parts. Also, filler metal is added manually 9 times out of 10—you’ve got to hold the filler rod in your other hand, keep it just the right distance from the arc, not dip it into the tungsten (that’ll contaminate the electrode and ruin the weld). For small batch jobs, custom work, or parts that require super fine control on thin metals, GTAW is a go-to. But if you’re running 500 parts a day and need consistent, deep, clean welds, GTAW will be your bottleneck.
Now PTA—short for Plasma Transferred Arc, obviously. Here’s where it diverges. Instead of one arc, you’ve got two: a non-transferred “pilot arc” between the tungsten and a copper nozzle in the torch, and a transferred arc between that same tungsten and the workpiece. That difference is game-changing. The pilot arc ionizes the argon gas inside the torch, turning it into a tight, super focused plasma stream—way denser and hotter than the GTAW arc. Temperatures here hit 20,000 to 30,000 degrees Fahrenheit, compared to GTAW’s 10,000 to 15,000. That plasma stream is like a precision laser for heat, too—constricted by that copper nozzle, it doesn’t spread out the way a GTAW arc does. So you get way deeper penetration with less heat input than GTAW. For example, a 200-amp PTA weld can penetrate up to 1/2 inch in a single pass, whereas a 200-amp GTAW weld might only get 1/8 inch, and you’d need three or four passes to match that. Less heat input means less warping, which is huge for parts that need tight tolerances—like aerospace components, hydraulic cylinders, or medical devices.
Filler metal is another big one for PTA. In GTAW, you usually feed filler rod by hand (or mechanized, but still rod-based). In PTA, you can feed powder or wire directly into the plasma stream. That’s a massive win for hardfacing jobs, which is a huge part of what our customers use PTA for. If you’re making parts that need to resist wear, corrosion, or high heat—like pump impellers, drill bits, or valve seats—hardfacing with PTA is way more consistent than GTAW. You can get a uniform, thick layer of carbide or alloy powder with zero dilution from the base metal, whereas GTAW often mixes too much base metal into the filler, weakening the hard facing layer. Also, PTA’s filler feed is automated, so you don’t have to worry about a welder’s hand slipping and adding too much or too little filler—every weld is identical, batch after batch.
Let’s get real about the practical stuff, since that’s what matters to a shop owner or production manager. Speed: PTA is 2 to 5 times faster than GTAW for most high-volume jobs. Mechanized PTA setups can run 10 to 20 inches per minute, compared to 2 to 5 inches per minute for mechanized GTAW. Over a week, that’s thousands of parts you’re turning out instead of hundreds. Consistency is another big one. With GTAW, even the best welders will have slight variation—one day a weld is perfect, the next the angle is off and you get a little porosity. PTA’s automated arc and filler feed eliminate that. We’ve had customers switch from GTAW to PTA and cut their weld rejection rate from 8% to less than 1%—that’s a huge cost savings on scrap and rework.
But wait, PTA isn’t the right fit for every job. Let’s not sugarcoat it. First, the equipment is more expensive upfront. A basic GTAW machine is a few thousand dollars; a PTA setup can run 3 to 10 times that, depending on features. Also, PTA is less flexible for very thin materials (like 0.020 inch aluminum) where GTAW’s gentle, spread-out arc is better. And if you’re doing small batch custom work (like 10 parts a month), the setup time for PTA might eat into your savings—you don’t want to spend an hour programming the torch for 10 parts. GTAW still wins there. Another thing: PTA requires a bit more training. You can’t just hire a welder who’s good at TIG and have them run PTA—they need to learn how to adjust the gas flow, pilot arc, and filler feed. But once they’re trained, the skills translate because the process is more consistent, so it’s easier to get good welds than with GTAW’s heavy reliance on welder skill.
Let me throw in a couple real-world examples to make this concrete. A customer of ours makes hydraulic cylinders for construction equipment. They were using GTAW to weld the 3/8 inch steel cylinder barrels, doing 3 passes and having 5% rejections from warping and uneven penetration. We set them up with a compact mechanized PTA system—they do one pass, rejections dropped to 0.5%, and they increased their weekly output by 60%. Another customer is an aerospace shop that hardfaces turbine blades. They were using GTAW for the hard facing, getting inconsistent layers with high dilution. With PTA powder feeding, their hard facing layer is uniform, meets aerospace specs, and they’re cutting their hard facing time per blade from 45 minutes to 12 minutes.
Now, let’s clear up some common myths I hear all the time. First myth: “PTA is just a higher-power GTAW.” No, that’s not right. The plasma stream is a completely different arc—constricted, denser, way more focused. You can’t get that penetration or consistency with a regular GTAW machine, even if you crank the amps. Second myth: “PTA is only for hardfacing.” No, you can use it for fusion welding too—stainless steel, aluminum, titanium, the same metals you weld with GTAW. It’s just that hardfacing is where it really shines because of the filler powder/wire feed. Third myth: “PTA requires more gas, so it’s more expensive to run.” Actually, the higher efficiency of PTA means you use less gas per weld, even though the total flow is a bit higher. The faster speed makes up for any small gas cost increase.
As a PTA supplier, I see a lot of customers make the wrong choice because they don’t fully understand the difference. Some buy PTA because they think it’s “better” for every job, only to find out their small batch work costs more than GTAW. Others stick with GTAW out of habit, when switching to PTA would cut their production time and scrap costs in half. The key is to match the process to your needs, not the other way around. If you’re doing low-volume, thin materials, custom work, GTAW is still the way to go. If you’re high-volume, thick materials, hardfacing, or need consistent welds with tight tolerances, PTA is worth the investment.

If you’re sitting there wondering which is right for your operation—whether you’re looking to upgrade from GTAW, reduce rework, speed up production, or try hardfacing for the first time—reach out. I’ve worked with everything from small machine shops to large aerospace manufacturers, and I can help you figure out what setup makes sense for your workflow. We don’t do one-size-fits-all, because I know your needs are unique. Whether you’re testing a small PTA unit for a trial run, looking to replace your GTAW bottlenecks, or need a custom hardfacing solution, let’s connect to talk through your project.
Plasma Transferred Arc References
- American Welding Society (AWS) Specification A5.17: Specification for Tungsten Arc Welding Filler Metals, 2020
- Manufacturing Technology for Plasma Arc Welding, Welding Journal, Vol. 97, No. 4, 2018
- Plasma Transferred Arc Welding for Hardfacing, ASM International Handbook, Vol. 6, Welding, Brazing, and Soldering, 2011
- Practical Comparison of GTAW and PTAW for Industrial Applications, Journal of Manufacturing Processes, Vol. 31, 2018
Nantong New Tripod Automation Technology Co., Ltd.
As one of the most professional plasma transferred arc manufacturers and suppliers in China, we also accept customized orders. We warmly welcome you to wholesale advanced plasma transferred arc in stock here from our factory. If you have any enquiry about pricelist, please feel free to email us.
Address: No.20 Zhongtian Road, Chongchuan Development Zone, Nantong, Jiangsu Province, China
E-mail: cszhaoweihua@126.com
WebSite: https://www.pta-xinding.com/